|
Product Details:
|
| Name: | Double Layer Forming Machine | Warranty: | 14 Months |
|---|---|---|---|
| Color: | Green Blue Yellow,according To Customer's Request | Weight: | 12000kgs |
| Control System: | PLC | After-sales Service Provided: | Video Technical Support,Field Installation |
| Raw Material: | Color Steel Sheet | Roller Material: | Heat-treatment And Hard Chrome 0.05mm |
| High Light: | 220V Double Roll Forming Machine PLC,Double Roll Forming Machine PLC 5.5KW,double 5.5KW Metal Roofing Roll Former |
||
Automatic 220V Metal Roofing Double Layer Forming Machine With Hydraulic Cutting
1. Brief introduction of Double Layer Forming Machine
Double layer forming machines for roofing and cladding sheets , with the greatest advantage is one double layer machine can make two design sheets.
usually, one layer forming machine or single layer forming machine only make one roofing design.
Therefore, if customer has limited install space and required to make two roofing designs, double deck machine is best choose.
shall we introduce you difference between one layer machine and double layer machine?
one layer machine include 5 ton manual decoiler, forming machine with post cut, hydraulic station, plc controller run out table.
double layer machine have additional set rollers and cut blade for another roofing design. that is , two sets rollers share with one machine base, motor , hydraulic station, plc controller and cut frame.
therefore, double layer forming machine only work one layer at one time.
Recently, double layer machine cut controlled by motor is adopted, it is good use in hot area, because, traditionally, hydraulic station give power to cut action, if in hot area, the oil in hydraulic station will very hot.
2. Specifications of Double Layer Forming Machine
| Main motor power | 5.5 KW |
| Roller material | 45# steel with chormed treatment. |
| Roller shaft material | 45# steel with quenched treatment. |
| Work speed | 8-12 m/min |
| Length of the part | 7500*1650*1500mm |
| Structure | Middle plate welded frame structure |
| Frame | 350 H steel with diagonal bracing |
| Drive mode | By double chains drive methord |
| control method | PLC control system |
| PLC | Delta Chinese good brand for good using |
| Hydraulic station | 4.5kw with cooling fan system |
| Cutting method | Hydraulic cutting |
| Cutter material | GCr12 chromed and quenched for good hardness and using |
3. Customer Feedback of Double Layer Forming Machine
Our Corrugated Roofing Machine have been exported to Slovenia, Bosnia and Herzegovina, Serbia, Uruguay, Russia, Canada, Australia, Nigeria, Zambia, Tanzania and etc. We were proud to receive recognized by our valued clients!
4. details photos of Double Layer Forming Machine
Contact Person: Linda
Tel: +8613630833762
