|
Product Details:
|
| Name: | Double Layer Forming Machine | Weight: | 15000kgs |
|---|---|---|---|
| Warranty: | 1 Year | Control System: | Siemens PLC Control With Touch Screen |
| Cutting Blade Material: | Cr12 With Quenched Treatment | Name: | Metal Steel Double Layer Steel |
| Roller Stations: | 20 Stations | Plc: | Mitsubishi/delixi/siemens |
| High Light: | 1250mm Double Layer Machine,Double Layer Machine 18m,18m Metal Roofing Sheet Forming Machine two |
||
1250mm Metal Roofing Autoamtic Double Layer Forming Machine With 18m Speed
1. Brief introduction of Double Layer Forming Machine
Double layer forming machines for roofing and cladding sheets , with the greatest advantage is one double layer machine can make two design sheets.
usually, one layer forming machine or single layer forming machine only make one roofing design.
Therefore, if customer has limited install space and required to make two roofing designs, double deck machine is best choose.
shall we introduce you difference between one layer machine and double layer machine?
one layer machine include 5 ton manual decoiler, forming machine with post cut, hydraulic station, plc controller run out table.
double layer machine have additional set rollers and cut blade for another roofing design. that is , two sets rollers share with one machine base, motor , hydraulic station, plc controller and cut frame.
therefore, double layer forming machine only work one layer at one time.
Recently, double layer machine cut controlled by motor is adopted, it is good use in hot area, because, traditionally, hydraulic station give power to cut action, if in hot area, the oil in hydraulic station will very hot.
while motor control cut in hot area is good idea.
2. Specifications of Double Layer Forming Machine
| Part details | Item Name | Specification |
| Material | Raw material | PPGI |
| Thickness | 0.3-0.8 mm | |
| Machine | Roller station | Depend on customer' drawing |
| Shaft diameter | 70 mm | |
| Shaft material | 45# steel with 0.05mm chrome | |
| Roller material hardness 30-40 HRC | 45# steel with 0.05mm chrome | |
| Machine size | About 6×1.5×1.3 m | |
| Machine weight | About 5.5 ton | |
| Machine color | As customer' request | |
| Working speed | 3-8 m/min | |
| Cutter | Hardness | 50-65 HRC |
| Cutting tolerance | ± 1 mm | |
| Material | Cr 12 | |
| Operate | Hydraulic cutting | |
| Power | Driving way | Chain 1 inch |
| Main power | 5.5 kw | |
| Pump power | 7.5 kw | |
| Voltage |
380v/50HZ,3P or customize as customer' request |
|
| Control system | PLC brand | Delta made in Twaiwan |
| Screen | Touchable screen | |
| Language | Chinese and English or add language as customer need | |
| Decoiler | Operation | Manual |
| Weight capicatity | 5 ton | |
| Price | Free as gift | |
| Receiving table | Operation | Manual |
| Length | 3 m | |
| Price | Free as gift |
3. Customer Feedback of Double Layer Forming Machine
1) Engineer will give free training lessons to labors in buyer's factory.
2) The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD150 per day for engineer.
3) During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
4). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
4. details photos of Double Layer Forming Machine
Contact Person: Linda
Tel: +8613630833762
