|
Product Details:
|
| Name: | Trapezoidal Roll Forming Machine | Weight: | Around 7000kgs |
|---|---|---|---|
| Warranty: | 1 Year | Use: | Roof And Wall |
| Dimension(l*w*h): | 7.2*1.6*1.7m | Control System: | PLC Control System |
| Name: | Roofing Sheet Roll Forming Machine | Power(w): | 5.5KW |
| High Light: | PPGI 380V Trapezoidal Roll Forming Machine,Trapezoidal Roll Forming Machine 7000kg,7000kg Zinc Sheet Making Machine |
||
PPGI 380V 1250mm Trapezoidal Roll Forming Machine For Metal Roofing
1. Brief introduction of Trapezoidal Roll Forming Machine
Trapezoidal Sheet Forming Machine make trapezoidal
Feeding width 1220mm for R101 and 914mm for R72, ( only feed different width raw material, no need to change machine)
Thickness 0.3-0.7mm or gauge 23-30(to produce different thickness, no need to change machine)
Yield strength:235Mpa-550Mpa
Any length product can be manufacture on this roll forming machine.
Main components of roll forming machine
5 ton manual decoiler, forming machine with post cut, PLC controller , hydraulic station, run out table
Main features of forming machine
mitsubishi or siemens control system to automatical produce with high precision
26 roller stations to garantee the flat and precise of final r101 trapezoidal laminas
forming machine weight about 11 tons
Easy installation:
forming lines are well installed and tested before delivery, customer only connect some wire and tubes according to video and manual to start forming machines.
2. Description of Trapezoidal Roll Forming Machine
| Machine Specifications | |
|---|---|
| Weight | About 9000kgs |
| Size | About 11m x 1.7m x 1.5m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | PPGI and PPGL Coils |
| Thickness | 0.3-0.8mm |
| Coil width | 1220mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | 22 |
| Diameter of forming rollers shafts | 80mm |
| Roll Forming Speed | 15-20m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 7.5kw |
| Hydraulic unit motor power: 3kw | |
| Electric voltage | According to customer’s requirement |
4. Detail photos of Trapezoidal Roll Forming Machine
Contact Person: Linda
Tel: +8613630833762
